Setting The Buzzer Volume - Waeco AirCom Service 6300G Manuel D'utilisation

5. Press ENTER to confirm.
6. Enter the password
3667
PAR
Mingliu
Unifont
ENTER-OK
7.
Use the cursor keys
• Unifont
• Mingliu
8. Press ENTER to confirm.
Press STOP.
9.
The font chosen is active and the standby menu is displayed.
12.6

Setting the buzzer volume

1.
Press the cursor keys
2.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER to confirm.
4.
Use the cursor key
5. Press ENTER to confirm.
6. Enter the password
2899
PAR
Loud
Quiet
ENTER-OK
7.
Use the cursor keys
Press ENTER to confirm.
8.
9. Press STOP.
The volume chosen is active and the standby menu is displayed.
12.7 Entering the company data
The company data is printed out with every service log.
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3.
Use the cursor key
4. Press ENTER to confirm.
.
FONT
or to select the desired font.
or to acces the basic menu.
or to select Other selections.
to select Service.
.
Buzzer
or to select the desired volume.
or to select Other selections.
to select Service.
English
11