Selecting The Language; Setting The Font - Waeco AirCom Service 6300G Manuel D'utilisation

English
12.3 Setting the length of the service hoses
Note
• If longer or shorter service hoses are required for the unit, you have to adjust the filling quantities to
the new hose lengths.
• The service hoses for the high and low pressure sides must always be of the same length as other-
wise the filling quantities will not be correctly measured.
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER to confirm.
3.
Use the cursor keys
Service.
4. Press ENTER to confirm.
5. Enter the password
6. Enter the hose length in centimetres.
Press ENTER to confirm.
7.
12.4

Selecting the language

1.
Press the cursor keys
2.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER to confirm.
4.
Use the cursor key
Press ENTER to confirm.
5.
6. Enter the password
7.
Use the cursor keys
Press ENTER to confirm.
8.
9. Press STOP.
The language chosen is active and the standby menu is displayed.
12.5

Setting the font

1.
Press the cursor keys
2.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER to confirm.
4.
Use the cursor key
10
or
or to select Service
----
.
7732
or .
or
to select Service.
.
5264
or to select the preferred language.
or to acces the basic menu.
or
to select Service.
to select Other selections.
to select Other selections.
to select Other selections.