Setting The Buzzer Volume; Entering Company Data - Waeco AirConServiceCenter ASC 5500 G RPA 2020 Notice D'utilisation

ASC5500G RPA 2020
7.6

Setting the buzzer volume

1. Press the cursor keys  or  to access the basic menu.
2. In the basic menu, use the cursor keys  or  to select "Other
selections":
3. Press ENTER to confirm.
4. Use the cursor key  to select "Service".
5. Press ENTER to confirm.
6. Enter the password "2899".
7. Use the arrow keys  or  to select the desired volume.
8. Press ENTER to confirm.
9. Press STOP. The language chosen is active and the standby menu
is displayed.
7.7

Entering company data

The company data is printed out with every service log.
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service".
4. Press ENTER to confirm.
5. Enter the password "3282".
6. The company data is shown in the third line of the display (7).
You can enter five lines, each with up to 20 characters.
The display shows the number of lines of company data after the
message "Enter company data" ("01" to "05").
Use the cursor keys  or  to select the line of company data you
want.
EN
Short selection
Free selection
Other selections
ENTER-OK
PAR
Loud
Quiet
ENTER-OK
Short selection
Free selection
Other selections
ENTER-OK
Initial start-up
Buzzer
93