Initial Start-Up; Setting Up And Switching On - Waeco AirCon Service Center ASC 2500 G LE Notice D'utilisation

Initial start-up

7 Initial start-up
7.1

Setting up and switching on

1. Wheel the AirCon Service Center to the workplace and lock the front
wheels (10).
I
NOTE
During operation, the device must be on a horizontal, flat surface so that
measurements can be made correctly.
2. Connect the AirCon Service Center to the mains.
3. To switch it on, set the main switch (22) to I.
The software version number appears in the display (7) for several
seconds:
"SW": Software status
"DB": Database
"SN": Serial number
"LF": Language file
✓ The AirCon Service Center then runs a software test.
✓ When the start-up procedure is complete, the AirCon Service Center
displays the following:
86
Dometic WAECO
ASC2500G SW
DB
SN 000020 LF
Software test.
Please wait
Refrigerant
PAG oil
UV tracer
11:56:35
ASC 2500 G LE / ASC 3500 G LE
25000122
lhd10028
R1340065
g. 4820
ml 375
ml 313
10/03/20
EN