User Codes - Waeco AirCom Service 6300G Manuel D'utilisation

13.3

User Codes

It is possible to protect the A/C service unit from unauthorised access using personal user codes. When this func-
tion is activated, the system queries the user code after being switched on, and the A/C service unit cannot be
started without it. Up to 10 different users can be created with individual codes. Users can be created using the
administrator code.
13.3.1 Creating user codes
1.
In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
Press ENTER to confirm.
2.
3.
Use the cursor key
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
4. To acces the ADM administrator menu enter the password
Service.
5. Enter the administrator code
Insert ADM Code
Note For security reasons, a new administrator code must be selected each time, but not
this will deactivate the entire function.
6. Enter the new administrator code:
ADM AREA
Insert new code
7. Confirm the new administrator code:
ADM AREA
Confirm new code
8.
Use the cursor keys
ADM AREA
User number
or to select Other selections.
to select Service and press ENTER to confirm.
----
(default setting) and press ENTER to confirm:
0000
----
----
----
or to select the user.
and press ENTER to confirm.
9786
1
English
as
0000
17