A&D Medical LifeSource 1200 ULTRACONNECT Manuel D'utilisation page 19

MEASUREMENT
Upload Stored Measurement
The monitor can store up to 100 readings and
can be transferred to the app on next connection.
To transfer data, open the A&D Connect app
and select Upload Measurement from the
dashboard pop-up window.
Multiuser Mode Measurement
1. Up to 6 people can use and store readings on the app.
Each user must have a mobile device paired with the
monitor. (See pg. E-15 for pairing instructions.)
2. If you are taking the reading without
the app, press the Start button on the
monitor to switch between usernames.
Select the desired user before each
reading. Data will transfer to the app
on your next connection.
Note: Usernames will be displayed in order of greater usage frequency.
Guest Mode Measurement
User can take a measurement as Guest
without account registration through the app.
Select Continue As Guest from sign in page
on the app. Data is saved on the device
memory but not in your account.
Follow the In-App mode instructions (pg. E-17)
once you are logged in as Guest.
Upload Measurement
Continue As Guest
App Display
App Display
E-19