Options; Acoustic Signals - Electrolux ESL63010 Notice D'utilisation

www.electrolux.com
6
Programme
4)
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the programme duration and the
consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
3) With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
Information for test institutes
For all the necessary information for test performance. send an email to:
info.test@dishwasher-production.com
Write down the product number (PNC) that is on the rating plate.

5. OPTIONS

5.1 Acoustic signals

The acoustic signals operate in these
conditions:
• When the programme is completed.
• A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic
signals.
Deactivating the acoustic signals
1. Press the on/off button to activate the
appliance.
2. Make sure that the appliance is in set-
ting mode. Refer to 'SETTING AND
STARTING A PROGRAMME'.
3. Press and hold the programme button
until the programme indicator (A)
flashes and the programme indicator
(B) comes on.
4. Press immediately the programme
button.
• The programme indicator (A) comes
on with a fixed light.
• The programme indicator (B) starts
to flash.
1) Degree of
soil
Type of load
All
Programme Duration
phases (min)
Prewash 12
5. Wait until the programme indicator (A)
goes off and the end indicator comes
on (the programme indicator (B) con-
tinues to flash).
• The acoustic signals are on.
6. Press the programme button. The end
indicator goes off.
• The acoustic signals are off.
7. Deactivate the appliance to confirm.
Activating the acoustic signals
1. Refer to 'Deactivating the acoustic sig-
nals', step (1) through (4).
2. Wait until the programme indicator (A)
goes off. The end indicator is off and
programme indicator (B) continues to
flash.
• The acoustic signals are off.
3. Press the programme button. The end
indicator comes on.
• The acoustic signals are on.
4. Deactivate the appliance to confirm.
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
Energy Water
(kWh) (l)
0.1 5