kala 1600 HR Manuel Utilisateur page 67

Let down the working table (Item 3)
and then the safety cover (Item 2).
For the Mistral 1600 HR :
Reinitialize the machine with the push
button located under the table, on the
right.
For the Mistral 2000 HR :
Reinitialize the machine by pressing the
key (o), located on the panel control.
Insert the feeding plate (Item 22) bet-
ween the rollers.
Adjust the rollers on the pressure posi-
tion 1 (see chapter 3).
For the Mistral 1600 HR :
Press (c) in "speed" mode.
For the Mistral 2000 HR :
Press (c) and guide the feeding
plate through until it comes out on the
other side of the machine.
Press on stop
Cut the film with the aid of the razor
cutter.
Adjust the pressure of the rollers
according to the application (see chap-
ters 3 and 6).
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
or (f).
60
22
23
24
FORWARD
STOP
2
3
22
PRESSURE
1 2 3 4 5
1 2 3 4 5 6 7 8 910
SPEED