Film Tension Adjustment; Cold Lamination; Lamination On One Side Only - kala 1600 HR Manuel Utilisateur

4 F
ILM TENSION ADJUSTMENT
The handles (Items 8 and 9) are used
to adjust the tension of the films on the
self-locking axles.
During the lamination, the film should
be sufficiently tight to ensure a perfect
lamination. However, the film should
not be stretched excessively. Only by
testing can you find the suitable ten-
sion. If some folds appear at level of
the rollers, increase lightly the tension
of the film.
To increase the tension of the film, turn
the handles (Item 8 or 9) clockwise.
5 C
OLD LAMINATION
5-1

Lamination on one side only

Turn on the machine with the switch
located at the back of the machine
(Item 19). The control panel lights.
Press (k).
Start the roller heating
sary.
Introduce a self-locking axle (Item 1)
inside the mandrel of the film reel.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
1
2
(q), if neces-
1
42
8
9
1