kala 1600 HR Manuel Utilisateur page 61

Let down the working table (Rep.3)
and then the safety cover (Rep.2).
For the Mistral 1600 HR :
Reinitialize the machine with the push
button, located under the table, on the
right.
For the Mistral 2000 HR :
Reinitialize the machine by pressing
the key (o), located on the panel
control.
Insert the feeding plate (Item 22) bet-
ween the rollers.
Adjust the rollers on the pressure posi-
tion 1 (see the chapter 3).
For the Mistral 1600 HR :
Press (c) in "speed" mode.
For the Mistral 2000 HR :
Press (c) and guide the feeding
plate through until it comes out on the
other side.
Press the button stop
Cut the film with the razor cutter and
recover the feeding plate.
Adjust the pressure of the rollers accor-
ding to the application (see chapters 3
and 6).
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
15
16
17
or (f).
54
22
FORWARD PRESSURE
1 2 3 4 5
1 2 3 4 5 6 7 8 910
SPEED
STOP
2
3