kala 1600 HR Manuel Utilisateur page 44

C :
HECK THAT
Your machine's
responds with the tension of your
electrical network.
The machine's supply needs to be
placed at disposal of a stand base
of a compatible electric socket CEI
60309-1.
I M
NSTALL THE ISTRAL ON A STABLE WORKING BASE
ACCESSIBLE ELECTRIC SOCKET
Do not touch the socket with damp
hands.
To unplug the machine, disconnect
the plug without pulling on the sup-
ply lead.
To prevent electric shocks, do not
use this laminating machine close
to water.
Make a working area behind the
machine.
Do not spill water on the machine,
the supply lead or the electric soc-
ket.
Do not use the machine if the sup-
ply lead is damaged.
Do not leave the electric lead in
contact with a warm surface.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
tension cor- The supply connections must be
congruent with the installation
rules of the standard NFC 15 100.
.
The machine should be installed in
a well-ventilated place.
Disconnect the general supply of
the machine with the switch (Item
19) after each use.
During the assembly of the machi-
ne, be careful with the quartz hea-
ter and the ground areas (vibra-
tions). If the machine must be dis-
assembled, call a technician.
37
,
CLOSE TO AN EASILY