Lamination On One Side And Simultaneous Adhesive Application - kala 1600 HR Manuel Utilisateur

Insert the feeding plate (Item 22) bet-
ween the rollers.
Adjust the rollers on the position of
pressure 1 (see chapter 3).
For the Mistral 1600 HR :
Press (c) in "speed" mode.
For the Mistral 2000 HR :
Press (c) and guide the plate
through until it comes out on the other
side.
Press the button stop
Cut the film with a razor cutter and
recover the feeding plate.
Adjust the pressure of the rollers
according to the application (see chap-
ters 3 and 6).
5-2 Lamination on one side and simulta-
neous adhesive application
Power up the machine with the switch
located at rear of the machine (Item
19). The control panel lights.
Press (k).
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
18
19
or (f).
47
22
FORWARD PRESSURE
1 2 3 4 5
1 2 3 4 5 6 7 8 910
SPEED
STOP