Roller Pressure Adjustment - kala 1600 HR Manuel Utilisateur

3 R
OLLER PRESSURE ADJUSTMENT
The Mistral is fitted with a device for adjusting the space and the roller pressure.
This device permits the use of thick supports (Maximal thickness : 25 mm).
Mistral 1600 HR
Adjustment of the space between the rollers :
1- Press (g) if the light (e) and the
light "PRESSURE" are not lighted ; the
function is activated.
2- Press (c) until the maximum space
is obtained.
Adjustment of the roller pressure :
1- Press (g) if the light (e) and the
light "PRESSURE" are not lighted ; the
function is activated.
2- Press (h) continuously until display
on control panel indicates the required
pressure (i) :
Mistral 2000 HR
Adjustment of the pressure during the
lamination
Adjustment of the space between the rollers :
1- Press (t) until the maximum space
is obtained.
Adjustment of the roller pressure :
1- Press (t) continuously until display
on the control panel indicates the
required pressure (u) :
EDNord - Istedgade 37A - 9000 Aalborg - telefon 9633 3500
1 2 3 4 5
41
c
FORWARD PRESSURE
1 2 3 4 5
d
e
1 2 3 4 5
f
STOP
g
h
REVERSE
POWER
o
c
f
h
i
6 7 8 910
SPEED
j
k
d
t
u
v
w
k