PL4500
3.6
TECHNICAL DATA
Gasoline engine, power
Fuel capacity
Max. operating pressure
Max. volume flow
Volume flow at 0.6 MPa (6 bar) with water
Material hose connection
Hose lengths
1-gun (primary striping)
2-gun (secondary striping,
stenciling)
Pump hose
Spray tips included
Striping
Stenciling
Max. size of tip with a spray gun
Max. viscosity
Max. temperature of the coating material
Empty weight
Model 2407312
Model 2407313
Dimensions (L x W x H)
Model 2407312
Model 2407313
Hydraulic oil filling quantity
Hydraulics housing
Max. vibration at the spray gun
Max. sound pressure level
* Place of measurement: 1 m distance from unit and
1.60m above floor, 12 MPa (120 bar) operating pressure,
reverberant floor
160cc (Honda)
0.66 US gal (2.5 l)
3300 PSI (22,8 MPa, 228 bar)
1.25 gal/min (4.7 l/min)
1.59 gal/min (6.01 l/min)
1/4"-18 NPSM
6' (P/N 316-533)
12' (P/N 2408659)
50' (P/N 316-505)
TR1, 419 (P/N 697-419) x 2
SC-6, 517 (P/N 662-517) x 1
0.035" – 0.89 mm
20,000 mPas
109º F (43 °C)
227 lbs (103 kg)
222 lbs (100.7 kg)
73" x 32" x 43.4"
73" x 32" x 43.4"
1.10 liter
lower than 2.5 m/s²
85 dB (A)*
OPERATING TEMPERATURE
This equipment will operate correctly in its intended ambient,
at a minimum between +50ºF (10°C) and 104ºF (+40°C).
RELATIVE HUMIDITY
The equipment will operate correctly within an environment
at 50% RH, 104ºF (+40°C). Higher RH may be allowed at lower
temperatures.
Measures shall be taken by the Purchaser to avoid the harmful
effects of occasional condensation.
ALTITUDE
This equipment will operate correctly up to 2100 m (6890 ft)
above mean sea level.
Honda service center can add a high-altitude kit
i
if operation at higher elevation is required.
TRANSPORTATION AND STORAGE
This equipment will withstand, or has been protected against,
transportation and storage temperatures of -13ºF (-25°C) to
131ºF (55°C) and for short periods up to 150ºF (70°C).
It has been packaged to prevent damage from the effects of
normal humidity, vibration and shock.
DESCRIPTION OF UNIT
11