General Functions; Status Lights; Audio Sources And Priorities; Voice Connect (Vox) Settings - SCHUBERTH SRC SYSTEM M1 Mode D'emploi

4.2 GENERAL FUNCTIONS

Press for 2 seconds
Power ON
3 BLUE flashes with ascending tone
In Standby, press
Power OFF
3 RED flashes with descending tone
Tap a or a to adjust and set volume of current
Volume
audio source
Mute / Unmute Tap a and a simultaneously
In standby, press a and a simultaneously for
Enable / Disable
2 seconds
VOX (For Intercom
ENABLED: Blue flash for 2 seconds
calls only)
DISABLED: Red flash for 2 seconds

4.3 STATUS LIGHTS

None
1 BLUE flash every 3 seconds
2 BLUE flashes every
3 seconds
1 RED flash every 3 seconds
2 RED flashes every 3 seconds Active mode – Battery is low
Solid RED
for 2 seconds
SRC-System™ is OFF
Standby mode
No active audio sources
Active mode – Call in progress / music
or other audio source is ON
Standby mode – Battery is low
Charging

4.4 AUDIO SOURCES AND PRIORITIES

If two connected audio sources try to play audio simultaneously, your
SRC-System™ automatically determines which audio source to play
through the speakers based on the priority of the connected devices.
Higher Priority
1. Mobile Phone audio or GPS instructions*

2. Intercom / Click-to-Link
3. A2DP (Stereo Bluetooth) audio
* GPS instructions from Smartphone GPS Apps are
Lower Priority
For example:
• Incoming mobile phone calls interrupt ongoing intercom calls
• Incoming intercom calls will interrupt ongoing A2DP music
• Intercom and Click-to-Link calls have the same priority. So
Click-to-Link calls will not interrupt any Intercom call in progress,
and vice-versa.
A2DP audio priority can be configured higher than Intercom audio
priority – see section 3.

4.5 VOICE CONNECT (VOX) SETTINGS

Your SRC-System™ offers VOX technology for safe and hands-free
operation of some key functions.
The VOX can be customized to adjust its sensitivity level. VOX
activation for Intercom calls can also be disabled completely.
You can choose between 'High', 'Medium' (default) and 'Low' VOX
sensitivity.
If you experience difficulties starting a conversation using VOX,
change setting to 'High'.
If VOX keeps starting calls involuntarily, change setting to 'Low'.
18
prioritized like A2DP audio