Front Glass Installation - Dimplex BLF3451 Manuel Du Propriétaire

Fireplace Installation

Front Glass Installation

1. Pour and evenly distribute the
supplied media in the Media tray
of the firebox(Figure 11).
2. Carefully mount front glass as-
sembly so that the front glass
hooks hang on the front glass
mounts on the fireplace (Figure
11).
3. Use the supplied two Phillips
sheet metal screws to fasten the
glass assembly tabs to the fire-
place (Figure 12).
4. If unit is not hard-wired, plug
fireplace into a 15 Amp, 120 Volt
outlet (refer to NOTE 1).
Figure 11
Front glass
assembly
Hooks (4)
Mounts (4)
Figure 12
Front tray
Tab
15