Bresser 2051642 Mode D'emploi page 12

batteries be replaced when the green light no
longer remains constant and starts to flash.
Twist-up Eyecup (2)
Screw in the twist-up eyecup (2) to use the
monocular while wearing glasses� If you are
not wearing glasses, unscrew the eyecup to
achieve the required distance from the pupil�
Adjusting the Focus
Look through your binoculars with your right
eye closed� Now adjust the image for your left
eye using the centre wheel (3) until it is sharp
and clear� Close your left eye and adjust the im-
age for your right eye using the dioptre ring (4)
until it too is sharp and clear�
12
Using the Image Stabilization Feature
This binocukars can be used with or without
the image stabilization feature switched on,
but switching it on will make viewing at higher
magnifications much easier! To switch this fea-
ture on, having first inserted the battery, simply
slide the on/off switch (1) to the "on" position
and when you do this, a small green light will
illuminate on the battery cover� It should im-
mediately become obvious that this feature is
switched on because the viewing image will no
longer be so sensitive to the natural trembling
of your hand(s)�
NOTES on Cleaning
Clean the eyepieces and/or lenses only with a
soft, lint-free cloth, (e.g. microfibre cloth). To
avoid scratching the lenses, use only gentle
pressure with the cleaning cloth�