TOPRO TROJA 2G Manuel D'utilisation page 17

Masquer les pouces Voir aussi pour TROJA 2G:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

C. Adjusting the height of the handles
Walking and standing ergonomically correct
As mentioned before, it is very important both for your safety and well-
being that the height of the handles are correctly adjusted. To find the
correct height, stand between the handles of the TOPRO Troja 2G and
let your arms hang loosely down with your elbows slightly bent and
your palms turned inwards. Your wrist now marks the correct adjustment
height of the handles.
Your TOPRO Troja 2G will support you safely if your handle height is
1.
correctly adjusted and you walk closely to it, as previously shown.
To adjust the handle height, release the lock wheel by turning it a few
times to the left (1.), adjust the handlebar tubes to a suitable height
(2.) and pull them gently up and down until you hear a click. Then
tighten the lock wheel again (3.).
It is important to adjust both handles to the same height in order to
maintain body symmetry and correct posture.
3.
2.
D. Height adjustment using the memory function
Always at the correct handle height
You have the opportunity to set the height of the handles at a standard
setting for your height so that you easily can find the same height again.
This can be useful when the rollator is being transported or stored as
compact as possible.
Decide the height of the handlebars (see C, adjusting the height of the
handles). Count visible holes at the back of the handlebar tubes. Un-
screw the lock wheel (1.). Pull the tube out of the frame (2.). The at-
4.
tached part will now follow the handlebar tube. Release the red memory
button by turning it halfway round and pulling it out (3.). Count down to
the correct hole on the handlebar tube as previously determined and
insert the memory button there. Then place the handlebar back into the
frame (4.) and tighten the lock wheel (5.).
Now, to adjust the grip height, simply loosen the lock wheel (1.) and pull
1.
up the handlebars as far as they go (2.). Tighten the lock wheel (5.). You
have now set your optimal ergonomical grip height. Hereafter your hand-
lebars will automatically stop at the correct height when you pull them up.
3.
5.
15
15

Publicité

Table des Matières
loading

Table des Matières