den. If in doubt, let the house installation check by a trained electrician. The manufacturer
shall not assume responsibility for damage which has been caused by absent or interrupted
protective conductor.
PRIOR TO FIRST USE
Clean all parts as described in the chapter titled "Cleaning and care".
INITIAL OPERATION
Insert the plug into the socket.
●
Place the coffee bean container on the unit. In the process, the MAX marking at the coffee
●
bean container points slightly to the right.
Turn the coffee bean container clockwise until it locks into place.
●
Remove the lid and fill the coffee bean container with coffee beans.
●
Place the lid back on.
●
On the lateral adjusting knob, set the degree of grinding ( = fine, = coarse).
●
On the front adjusting knob, set the desired number of cups (2 - 12 cups).
●
Push the coffee grounds container in.
●
IMPORTANT!
Please check to see that the lid is always firmly on the coffee grounds container. The unit will
not function without this lid.
Press the Start/Stop button in order to start the grinding process.
●
IMPORTANT!
The finer the grinding degree, the longer the grinding process.
You can cancel the grinding process by pressing the Start/Stop button again.
●
After finishing the grinding process, remove the coffee grounds container and freshly brew
●
your coffee.
NOTE
You can obtain our high-quality coffee beans in our online shop www.graef.de.
CLEANING AND MAINTENANCE
Old coffee remaining in the unit may lead to oxidation. This affects the result of the preparation
and an unpleasant and unpalatable taste may develop. The unit should always be in a well-
kept condition in order to ensure a perfect result at all times. Depending on the frequency of use,
clean the unit at least once a week.
Before cleaning, remove the power plug.
Use a soft and moist cloth to clean the outer surfaces of the unit. Use a mild detergent in case
●
of heavy soiling.
Turn the coffee bean container anti-clockwise and remove it. Check to see that no beans are
●
in the container any more.
20