Espresso Machine ES 80 / ES 81
Do not set up the unit in a hot,
■
wet or moist environment.
■
The electric socket must be rea-
dily accessible so that the power
cord can be easily unplugged.
Electric connection
Follow these instructions about
the electrical connection for safe
and flawless operation of the unit:
■
Before connecting the unit,
compare the connection infor-
mation (voltage and frequency)
on the rating plate with those of
your electrical network. This in-
formation must match to avoid
damage to the unit. If in doubt,
ask your electrician.
■
The socket must be fused with
at least a 10A circuit breaker.
■
Make sure that the power cord
is not damaged. Do not conduct
it over hot surfaces or sharp
edges.
The supply cord must not be
■
pulled tight.
The electrical safety of the unit
■
is only ensured if it is connected
to a properly installed protecti-
ve conductor system. Operation
on a socket without a protecti-
ve conductor is prohibited. If in
doubt, have the building instal-
lation checked by an electrici-
an. The manufacturer does not
assume any responsibility for
damages caused by a missing
or interrupted protective con-
ductor.
Before the first use
Before using for the first time or
after a long period of non-use,
you should prepare several cups
of water (without coffee grounds)
to thoroughly flush the system.
Proceed as described in the "Pre-
paring espresso" section.
Setup and Functioning
Features
Filter support automatic machi-
●
ne
Aluminium/stainless
●
housing
Single thermoblock heater
●
Brass filter support
●
●
360 °C swivelling milk frother/
hot water nozzle
●
2.5 litre water tank
●
Freely programmable water vo-
lume
●
Freely programmable tempera-
ture
●
Water level indicator
●
Warming plate for cups
Removable drip dish
●
Double-walled filter insert for
●
1 cup
Double-walled filter insert for 2
●
cups
Stainless steel milk container
●
●
Coffee spoon
●
Cleaning set
●
Tamper
© Gebr. Graef GmbH & Co. KG - 03
EN
steel
33