stayer RO125 Instructions D'emploi page 20

Regulations
Technical Data
Noise emission values measured in accordance with the
relevant standard. (K = 3)
Sound pressure level LpA 90 dB (A) RO752EK.
LWA Sound power level 101 dB (A) RO752EK.
Use ear protection if the sound pressure exceeds 85
dB (A).
= Rated power input
= Load speed
= Orbit
= Disc Diameter
= Weight
= Class II - The machine is double insulated
L = Sound power level
WA
L = Sound pressurelevel
PA
= Vibration
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V - 60Hz. For lower voltage and models
for specific countries, these values can vary.Please observe
the article number on the type plata of your machine.The
tradenamesoftheindividualmachines may vary.
NoiseNibration lnformation
Noise determined according to EN 62841-1.
The typical sound pressure level of appliance determined
with a filter A product are: Sound pressure level 81 dB (A)
sound power level 92 dB (A). Tolerance K = 3 dB.
Wear hearing protection!
Total vibration Ah values (vector sum of three directions)
and uncertainty K determined according to EN 62841:
ah = 4 m/s , K <1.5 m/s
2 2
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 62841-1 and may be used to compare one tool
with another. lt may be used for a preliminaryassessment of
exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is used
for different applications,with different accessories or
poorly maintained, the vibration emission may differ. This
ENGLISH
20
may significantly increase the exposure leveloverthe
totalworking period.
An estimation of the levelof exposure to vibration should also
take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly
reduce theexposure leveloverthetotal working period.
ldentify additional safety measures to protect the operator from
the effects of vibration such as: maintain the tool and the
accessories,keepthe hands warm,organisationof work pattems.
20