Residual Heat Indicator; Cooking Using The Automatic Warm Up Function - AEG 79301 KF-N Instructions De Montage Et Mode D'emploi

Residual Heat Indicator

When an individual cooking zone or the entire hob is
switched off, any residual heat is shown with an h (for
"Hot") in the digital display for the appropriate cooking
zones.
Even after the cooking zone has been switched off, the
residual heat indicator only goes out when the cooking zone is cold.
2
You can use the residual heat for melting and keeping food warm.
1
Important! As long as the residual heat indicator is illuminated, there
is a risk of burns.
1
Important! If the power supply is interrupted the h symbol will also
go out and information about residual heat will no longer be available.
However, it is still possible to burn yourself. This can be avoided by tak-
ing care around the hob.

Cooking using the automatic warm up function

All of the cooking surface's four cooking zones can be adjusted to any
of nine settings, and are equipped with an automatic warm up func-
tion:
– ¿, lowest heat setting
– Ç, highest heat setting
– a, automatic warm up function.
When you select the desired heat setting using the
lector sensor panel, the cooking zone will operate at maximum power
for a certain period of time and will then automatically switch back to
the follow-on heat setting that has been set.
The length of time that the automatic warm up function operates de-
pends on the follow-on heat setting selected.
All manuals and user guides at all-guides.com
heat setting se-
43