Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
AR6410NBL Features and Ports
Battery Input
Aileron (CH2)
Reversed Aileron
(CH2) or Aux1 (CH6)
Receiver Installation
We recommend using double-sided foam tape strips and/or minimal hot glue
in the corners to install your receiver in the fuselage. The servos must be in the
appropriate position to attach to and drive the elevator and rudder pushrods.
Installation will vary depending upon application.
Servos
Specially designed servos are available through Spektrum.
NotICE: Using any other servo(s) may cause damage to the receiver and/or
void the servo warranty.
Brushless
Motor Leads
Rudder (CH4) Servo
Elevator (CH3) Servo
Antenna
4
X-Port (all 4 pins)
OR
Gear (CH5) (3 pins to the left)
Publicité
Table des Matières
