Spektrum AR6410NBL Manuel D'utilisation page 7

To Change CH6 to a Reversed CH2 for Dual Ailerons or Reversed CH2
to CH6
1. Ensure the receiver and transmitter are bound
2. Turn the transmitter on
3. Move the THRO stick to the full throttle position
4. Move the Control sticks to the corresponding position to change between the
available options (see illustration)
5. Hold this position and plug the battery into the receiver
6. The LED on the receiver will turn solid within 5 seconds and the LED will flash 3
times, indicating the option is now changed
7. Disconnect the battery from the receiver
8. Turn the transmitter off
Mode 2
THRO/RUDD
To Change CH5 to X-port or X-port to CH5
When X-Port is active, CH5 and CH6 are not available; however, reversed aileron
(CH2) is still available.
1. Ensure the receiver and transmitter are bound
2. Plug the X-Port accessory or the optional servo into the X-Port/CH5 port
3. Turn the transmitter on
4. Move the THRO stick to the full throttle position
5. Move the control sticks to the corresponding position to change between the
available options (see illustration)
6. Hold this position and plug the battery into the receiver
7. The LED on the receiver will turn solid within 5 seconds and the LED will flash 3
times quickly, indicating the option is now changed
8. Disconnect the battery from the receiver
9. Turn the transmitter off
Mode 2
THRO/RUDD
Optional Support Items
Please see www.horizonhobby.com for a complete list of items.
Rev. CH2/CH6
1. Full THRO
2. Up ELEV
3. Left AILE
ELEV/AILE
CH5/X-port
1. Full THRO
2. Right RUDD
ELEV/AILE
ELEV/RUDD
ELEV/RUDD
7
Mode 1
THRO/AILE
Mode 1
THRO/AILE
EN