Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Problem
The system will
not connect
Receiver quits
responding
during operation
Receiver loses
its bind
Receiver blinking
at landing
Possible Cause
Your transmitter
and receiver are
too close together
You are around metal
objects
Model selected is not
the model bound to
Your transmitter was
accidentally put into
bind mode and is not
bound to your receiver
anymore
Inadequate battery
voltage
Loose or damaged
wires or connectors
between
battery and receiver
Transmitter stand or
tray could be depress-
ing the bind button
Bind button pressed
before transmitter
turned on
System turned on and
connected, then receiv-
er turned off without
turning off transmitter
10
Solution
Move transmitter 8 to 12
feet from receiver
Move to an area with less
metal
Check model selected and
ensure you are bound to
that model
Rebind your transmitter
and receiver
Charge batteries. Spektrum
receivers require at least
3.5V to operate. An
inadequate power supply
can allow voltage to mo-
mentarily drop below 3.5V
and cause the receiver to
brown out and reconnect
Check the wires and
connection between bat-
tery and receiver. Repair or
replace wires and/or
connectors
If stand is depressing bind
button, remove from stand
and rebind
Rebind your system follow-
ing binding instructions
Turn off transmitter when
receiver is turned off
Publicité
Table des Matières
