Maintenance And Care; Disposal Information; Declaration Of Conformity - Flex ALP 3 Notice D'instructions

ALP3

Maintenance and care

Cleaning
If the power tool is damp after use, wipe the power tool and
accessories with a dry, soft cloth.
Do not use solvents or abrasive cleaning agents to remove dirt.
Use a clean cloth moistened with water and a mild detergent.
Remove dust, etc. from the Laser outlet window (2, 7) with a soft cloth.
Repairs
Caution!
Only authorised technicians may make adjustments.
Repairs may be carried out by an authorised customer service centre
only.

Disposal information

Only for EU countries:
Do not dispose of electric tools together with household waste
material!
In observance of European Directive 2002/96/EC on waste
electrical and electronic equipment and its implementation in
accordance with national law, electric tools that have reached
the end of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Warning!
Do not throw accumulators/batteries into the household waste, fire or
water. Do not open disused batteries. Accumulators/batteries should
be collected, recycled or disposed of in an environmentally friendly
manner.
EU countries only: In accordance with Directive 91/157/EEC defective
or used batteries must be recycled.
Note
Please ask your dealer about disposal options for redundant power
tools.

Declaration of Conformity

We hereby declare that this product corresponds with the following
standards or normative documents:
EN 61326/A3:2003, EN 61000-4-2/A2:2001,
EN 61000-4-3:2002 according to the regulations of
Directive 2004/108/EC.
01.11.2008 Rühle
FLEX-Elektrowerkzeuge GmbH, Bahnhofstrasse 15
D-71711 Steinheim/Murr
Severin
15