Overview - Flex ALP 3 Notice D'instructions

Caution. Damage to property!
– Always lock ( ) the switch (3) when transporting the device.
– Do not use the device in the rain.
– If the power tool is brought from a cold to a warm environment or
vice versa, leave the power tool to acclimatise before using it.
– If using adapters and tripods, ensure that the power tool has been
firmly screwed down.
– Transport the device in the appropriate transport pouch only.
– If shipping the power tool or disconnecting it for a prolonged
period, isolate the batteries or take them out of the power tool.
– Only authorised technicians may make adjustments.
Damage to the environment!
– Dispose of power tool, battery packs and batteries in accordance
with the currently valid national directives. If in doubt, contact the
manufacturer or supplier
12

Overview

1 Operating display/battery status indicator
2 Laser outlet window
3 On/Off switch
(also compensation clamp for self-levelling device)
4 Battery compartment
¼
5 " thread
(for attachment to tripod or universal holder)
6 Magnetic clamps (for attachment to metallic bases)
7 Laser outlet window
ALP3