Établissement De L'emplacement De La Plaque Murale Sous Votre Armoire - Blomberg BOTR30200CSS Manuel D'installation

Installation
5
5.1.3 Établissement de l'emplacement
de la plaque murale sous votre armoire
Emplacement de la plaque—sous une armoire
à fond plat
NOTE: IT IS VERY
READ AND FOLLO IMPOR
IN THE W THE TANT TO
BEFOR INSTAL LATION DIRECT IONS
REAR WALL E PROCE EDING INSTRU CTIONS
This Rear TEMPL ATE. WITH THIS 3/8" TO EDGE
mounting Wall Template 12"
outlet. plate and to locate serves to position
1. Use a level to check the horizontal the bottom exhaust
2. Locate accurately . that the template
right side and mark at least is positioned
of the centerline one stud on the left 4"
screw mounted It is important to use at . or
of the microwave firmly in a stud to least one wood
3. Drill holes locations for the supplied . Mark two additional, support the weight
a stud, in the marked toggle bolts. evenly spaced Trim the rear wall
that do drill a 3/16" hole for locations. Where templa
toggle bolts. not line up with a stud, wood screws. there is
DO NOT drill 5/8" holes for For holes
4. Remove AT THIS TIME. INSTALL THE MOUNTIN
5. Review the template G PLATE
installation the Installation from the rear wall.
situation. Instruction book for
your
Darle vuelta
versión en Español. a la hoja para consultar
la
Locate and mark
mountin g plate. holes to align with
IMPOR holes in
LOCAT TANT: the
THE CENTE E AT LEAST
RLINE. ONE STUD
MARK THE LOCAT ON EITHER SIDE OF
SPACE D TOGGL ION FOR
AREA. E BOLTS 2 ADDITI ONAL,
IN THE MOUNT EVENL Y
ING PLATE
Trim the rear wall
templa
te along the dotted
line.
Locate and mark
mountin holes to
IMPOR g plate. align with holes in
LOCAT TANT: the
E AT LEAST
THE CENTE ONE STUD
MARK THE LOCAT RLINE. ON EITHER
SPACE ION FOR SIDE OF
AREA. D TOGGL E BOLTS 2 ADDITI
IN THE ONAL, EVENL
MOUNT ING PLATE
C L
Tracez une ligne verticale sur le mur au centre de
l'espace de 30 po de large. Collez le gabarit pour
mur arrière sur le mur le long de la ligne centrale
et en touchant le bas de l'armoire.
Emplacement de la plaque—sous une armoire dotée d'un
rebord
NOTE: IT IS VERY
READ IMPOR
IN THE AND FOLLO TANT
BEFOR INSTA LLATIO W THE DIREC TO
E PROC N INSTR TIONS
REAR WALL EEDIN G WITH UCTIO NS
This Rear TEMPL ATE. THIS 3/8" TO EDGE
mounting Wall Template serves 12"
outlet. plate and to locate to position
1. Use a level the horizonta l exhaust the bottom
accuratel y. to check that the
2. Locate and mark template is positione
right side of the centerline at least one stud d 4"
It is importan . on the left or
screw mounted t to use at least
of the microwav locations e. Mark firmly in a stud to one wood
3. Drill holes for the supplied two additiona support the weight
a stud, in the marked toggle bolts. l, evenly spaced Trim the rear wall
that do drill a 3/16" locations . Where
toggle bolts. not line up with hole for wood screws. there is
a stud, drill 5/8" For holes
AT THIS DO NOT INSTALL holes for
4. Remove TIME. THE MOUNTI
5. Review the template from the NG PLATE
installatio the Installatio n Instructio rear wall.
n situation. n book for your
Darle vuelta
versión a la hoja
en Español . para consulta r la
Locate
mounti and mark holes to
ng plate. align with
IMPOR TANT: holes in the
LOCAT
E AT LEAST
THE CENTE ONE STUD
MARK THE LOCAT RLINE . ON EITHE
SPACE ION FOR R SIDE OF
D TOGG 2 ADDIT
AREA. LE BOLTS IONAL , EVENL
IN THE MOUN Y
TING PLATE
Trim the
rear wall
templa te along
the dotted
line.
Locate and mark
mounti holes to
ng plate. align with
IMPOR TANT: holes in
LOCAT
THE CENTE E AT LEAST
RLINE ONE STUD
MARK THE LOCAT . ON EITHE
SPACE ION FOR
D TOGG LE BOLTS 2 ADDIT
AREA. IN THE IONAL
MOUN
C L
Tracez une ligne verticale sur le mur au centre de
l'espace de 30 po de large.
Collez le gabarit pour mur arrière sur le mur le long de la
ligne centrale et en touchant le cadre de l'armoire inférieure.
46 / 63 FR
Four à micro-ondes à convection à hotte intégrée / Manuel d'installation
te along
the dotted
line.
16-1/2
Y
templa
te along the dotted
line.
the
R SIDE
OF
, EVENL
Y
TING PLATE
À 33 po de la surface de cuisson
Emplacement de la plaque—sous une armoire
dont le fond est doté d'un surplomb avant
NOTE
: IT IS VERY
READ AND FOLLO IMPOR
IN THE INSTA W THE TANT TO
BEFOR E PROC LLATIO N INSTR DIREC TIONS
REAR WALL EEDIN UCTIO
This Rear TEMP LATE. G WITH THIS NS
mounting Wall Template 3/8" TO EDGE
outlet. plate and to locate serves to position 12"
1. Use a level the horizonta the bottom
accurate to check that the l exhaust
2. Locate and mark ly. template is positione
right side of the centerline at least one stud d
It is importan . on the left or 4"
screw mounted t to use at least
of the microwav locations e. Mark firmly in a stud to support one wood
3. Drill for the supplied two additiona the weight
a stud, holes in the marked toggle bolts. l, evenly spaced
that do drill a 3/16" hole for locations . Where Trim the rear wall
toggle not line up with wood screws. there is templa
bolts. a stud, drill 5/8" For holes te along the dotted
AT THIS DO NOT INSTALL holes for line.
4. Remove TIME. THE MOUNTI
5. Review the Installatio the template from the NG PLATE
installatio n situation. n Instructio rear wall.
n book for your
Darle vuelta
versión en Español a la hoja para consulta
. r la
Locate
and mark
mount ing plate. holes to align with
IMPOR holes in
LOCAT TANT: the
E AT LEAST
THE CENTE ONE STUD
MARK RLINE . ON EITHE
SPACE THE LOCAT R SIDE OF
D TOGG ION FOR 2 ADDIT
AREA. LE BOLTS IONAL
IN THE MOUN , EVENL Y
TING PLATE
Trim the
rear wall templa
te along
the dotted
line.
Locate
mount and mark holes to
ing plate. align with
IMPOR TANT: holes in
LOCAT the
THE CENTE E AT LEAST
RLINE ONE STUD
MARK THE LOCAT . ON EITHE
SPACE ION FOR R SIDE OF
AREA. D TOGG LE BOLTS 2 ADDIT
IN THE IONAL , EVENL
MOUN TING PL Y
Vos armoires peuvent être dotées de garnitures
décoratives qui entravent l'installation du micro-
ondes. Enlevez l' é lément décoratif pour installer
convenablement le four à micro-ondes et pour
vous assurer qu'il est à niveau
Le four à micro-ondes doit être à ni-
veau.
Utilisez un niveau pour vous assurer que le fond de
l' a rmoire est à niveau.
Si les armoires sont dotées uniquement d' u n re-
bord avant, sans rebord sur les côtés ou à l' a rrière,
installez la plaque de montage plus bas, à la même
distance que le rebord avant de l' a rmoire. Ainsi, le
four sera à niveau.
1. Mesurez l' é paisseur intérieure du rebord avant
de l' a rmoire.
2. Tracez une ligne horizontale sur le mur arrière,
en dessous du fond de l' a rmoire, à une distance
égale à l' é paisseur intérieure du rebord avant de
l' a rmoire.
3. Pour l'installation sous une armoire dotée
uniquement d' u n rebord avant, alignez les
languettes de montage avec cette ligne
horizontale, sans toucher le fond de l' a rmoire,
tel que décrit dans le sous-titre 5.1.4.
Tracez une ligne sur le mur
arrière correspondant à la
profondeur du surplomb
avant.
NOTE: IT IS VERY
READ IN THE AND FOLLOW INSTALLAT IMPORTANT THE DIRECTION TO
BEFORE REAR PROCEEDIN ION INSTRUCTI S
mounting This Rear Wall Template WALL TEMPLATE G WITH . THIS ONS 3/8" TO EDGE
outlet. 1. Use plate and to locate serves the horizontal to position the bottom 12"
2. Locate accurately. a level to check that the template exhaust
right side and mark of the centerline. at least one stud on the is positioned 4"
screw mounted of the microwave. It is important firmly in to use at least one wood left or
3. Drill locations for the holes in supplied Mark two a stud to support additional, evenly the weight
that do a stud, drill a 3/16" not line the marked hole for toggle locations. bolts. Where spaced Trim the rear wall
toggle bolts. DO NOT up with a stud, wood screws. drill 5/8" holes for For holes there is template along the dotted
4. Remove AT THIS TIME. the template INSTALL THE MOUNTING line.
5. Review installation the Installation situation. from the Instruction rear wall. PLATE
book for your
Darle vuelta versión en Español. a la hoja para consultar
la
mounting Locate and mark holes to
IMPORTAN plate. T: align with holes in the
THE CENTERLIN LOCATE AT LEAST
MARK THE LOCATION E. ONE STUD ON EITHER
SPACED AREA. TOGGLE FOR 2 ADDITIONA SIDE OF
BOLTS IN THE MOUNTING L, EVENLY
PLATE
Trim the
rear wall template along
the dotted line.
Locate and mark
mounting IMPORTAN plate. holes to align with holes
LOCATE T: in the
THE CENTERLIN AT LEAST ONE STUD
SPACED MARK THE LOCATION E. ON EITHER SIDE OF
AREA. TOGGLE BOLTS FOR 2 IN THE ADDITIONA L, EVENLY
MOUNTING PLATE
C L
À 33 po de la surface de cuisson