Wireless Pairing; Timer Photography; Adjust Camera Settings; Settings Of The Remote Control - Rollei 28009 Mode D'emploi

4. Wireless pairing

In case that the transmitter and the receiver are not
working with each other, please follow the steps to
pair them:
• Ensure that the transmitter and receiver are
equipped with batteries and that the receiver power
switch is in the position „OFF".
• Press and hold the shutter release button on the
receiver and turn the receiver power switch to
the „ON" position at the same time. The receiver
focuses and releases and the indicator light will
flash bright blue and orange.
• Press the shutter release button on the transmitter
and the pairing is completed. Half-press again the
shutter release button of the transmitter. If the
pairing has been successful, the receiver indicator
light will be orange. If the receiver indicator light is
not orange, repeat the above steps.
Use the shutter remote control
The timer shutter remote control has the following
functions:
• Automatic timer: Please choose the delay time of
the interval shooting (the time before shooting
starts), the exposure time, the interval time and
the number of shots. If your camera is not in BULB
mode but the shutter speed is selected in your
camera directly (Manual Mode), you can release the
shutter via the remote control. But please note that
the shutter speed of your camera will be taken for
the photo.
• Manual release: Use the shutter release button on
the transmitter to take pictures manually. That me-
ans as soon as you shortly press or hold the shutter
release button a photo will be taken in that time.

5. Timer photography

5.1 Adjust camera settings

1. Connect the receiver with the camera and turn the
camera on.
2. Adjust the camera according to the following set-
tings (for details, refer to the camera's user manual):
Exposure Mode
Shutter Speed
Interval Timer
Focus Mode
Continous Shooting
*If possible, select release priority.

5.2 Settings of the Remote Control

Press the SET button (3). On the display panel will
flash „SET". Now different values can be entered by
the direction buttons (4).
If the timer settings are done, press the "SET" button
again to close the settings adjustement.
Manual
Bulb
Close
AF-C
Manual
Single
21