Using The Bluetooth Audio Player - JVC KW-ADV790 Manuel D'instructions

Using the Bluetooth audio player

Sound mode
(☞ page 45)
The Bluetooth icon
lights up when
the adapter is
connected.
: Buttons on the touch panel. In the
explanation, they are indicated
inside [
1
* When a cellular phone with audio function is connected, appears.
2
* Indicates the button pressed. It may be different from the operation status.
3
* You cannot select "New Device" when a Bluetooth audio player is connected.
~
Press [SOURCE], then press [Bluetooth
AUDIO].
(☞ page 9)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.
jvc-victor.co.jp/english/car/>
1
*
☞ page 45
].
3 8 7
[ / ] [ ] Start and pause playback
4 ¢
[ ] Reverse/forward skip
5 ∞
[ ] Select the registered device
("New Device" appears when a new device can
be registered.*
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
Start and pause playback.
:
: Reverse/forward skip
Adjust the volume.
:
33
2
*
Status of the device
Signal strength/Battery
remainder
(only when the information
comes from the device)
3
)
EXTERNAL DEVICES