Table Des Matières - JVC KW-ADV790 Manuel D'instructions

How to reset your unit
How to forcibly eject a disc
NO EJECT?
EMERGENCY EJECT?
Back
at the same time
1
• If this does not work, reset the unit.
Cautions on the monitor:
• The monitor built in this unit has been produced
with high precision, but it may have some
ineffective dots. This is inevitable and is not
malfunction.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with the sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it
off).
• When the temperature is very cold or very hot...
- Chemical changes occur inside, causing
malfunction.
- Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in
such environments.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
• Your preset
adjustments will
also be erased.
ENTER
3
Exit
2
1
3
Contents
INTRODUCTION
Playable disc types .......................... 4
Basic operations-
Monitor panel/touch panel ............ 5
Basic operations-
Remote controller (RM-RK252) ...... 6
OPERATIONS
Before operating the unit ................ 8
Common operations ........................ 9
Listening to the radio ...................... 10
Disc operations ................................ 13
EXTERNAL DEVICES
Bluetooth® operations-
Cellular phone/audio player .......... 27
Listening to the CD changer .............. 34
Listening to the satellite radio ......... 36
Listening to the HD Radio™ Broadcast .... 39
Listening to the iPod ........................ 40
Using other external components ..... 42
SETTINGS
Sound equalization .......................... 45
Assigning titles to the sources .......... 46
Menu operations ............................. 47
REFERENCES
Maintenance ................................... 56
More about this unit ........................ 57
Troubleshooting .............................. 64
Specifications .................................. 68
INTRODUCTION