Storing Channels In Memory; Selecting Preset Channels - JVC KW-ADV790 Manuel D'instructions

Storing channels in memory

You can preset six channels for each band.
Ex.: Storing a channel into preset number 4
1
Display the Preset List.
• If you want to select a channel by channel name,
first select a channel, then display the Preset List.
2
Tune in to a station you want to preset.
3
Select a preset number.
The station selected in step 2 is now stored in
preset number 4.

Selecting preset channels

On the remote only:
1
2
Selecting on the lists
You can select a channel using the lists—Category
list/Channel list.
1
Press [AV MENU] on the touch panel or AV
MENU on the monitor panel.
2
Press [List].
3
Select a category (1), then a channel (2)
from the selected category.
* Press to move to the previous/next pages of the
list
1 Current category list number/total category
list number
2 Current channel list number/total channel list
number of the current category
• <List> menu can also be accessed by pressing
[SHORT CUT] on the touch panel, then...
38
☞
page 45
☞
page 51
SIRIUS Satellite
(only
radio)