Things to do to have the filter usage time calculated
automatically
(For products connected to the mains water line and equipped with filter)
1- After plugging the refrigerator in, press A and B buttons together to activate the
key lock.
2- Then press Eco-Extra (1), Fridge Compartment Temperature Setting (4), Quick
Cool (5) and Freezer Compartment Temperature Setting (3) buttons respectively.
1
3
If button configuration is pressed in the correct order, key lock symbol will go off,
buzzer will be activated shortly, and Filter change warning indicator illuminates. Press
cancel filter change warning button (Item 19 in display descriptions) after changing
the filter to have the filter usage time calculated automatically.
C
If the filter usage time is being calculated automatically, filter change warning
indicator will illuminate in a few seconds after the product is plugged in.
C
Automatic filter usage time calculation is not active ex factory. It must be
activated in products equipped with a filter.
C
Repeat the same procedure in products whose automatic filter usage
time calculation is activated in order to deactivate the filter usage time
calculation.
25
EN
A
B
4
5