Blomberg KQD1360X Manuel D'utilisation page 24

9. Quick Freeze Function Indicator
It indicates that the Fast Freeze function
is active. Use this function when
you place fresh food into the freezer
compartment or when you need ice.
When this function is active, your
refrigerator will run for a certain period of
time.
Press the relevant button again to
deactivate this function.
10. Freezer Compartment
Temperature Indicator
It indicates the temperature set for
Freezer Compartment.
11. Fridge Compartment
Temperature Indicator
Indicates the temperature set for Fridge
Compartment.
12. Quick Cool Function Indicator
Indicates that the Quick Cool function is
active. Use this function when you place
fresh food into the fridge compartment
or when you need to cool your food
quickly. When this function is active, your
refrigerator will run for 2 hours without
stopping.
Press the relevant button again to
deactivate this function.
13. Flexi Zone Storage Compartment
Temperature Indicator
It indicates the temperature set for Flexi
Zone compartment.
14. Economy Mode Indicator
Indicates that the refrigerator is running
in energy-efficient mode. Freezer
Compartment temperature
This indicator will be active if the function
is set to -18 or the energy efficient
cooling is being performed due to Eco-
Extra function.
15. Error Status Indicator
If your refrigerator does not cool
adequately or if there is a sensor failure,
this indicator will be activated. When this
indicator is active, Freezer Compartment
Temperature indicator will display "E"
and Fridge Compartment Temperature
Indicator will display numbers such
as "1,2,3...". These numbers on the
indicator provides information about the
error to the service personnel.
16. Key Lock Indicator
Use this function if you do not want your
refrigerator temperature setting changed.
Press Quick Cool Button and Flexi Zone
Compartment Temperature Setting
Button simultaneously for a long time (3
sec) to activate this feature.
Press the relevant buttons again to
deactivate this function.
17. Ice Cancel Button
To stop ice formation, ice cancel button
is pressed for 3 seconds. When ice
cancel is selected, no water will be sent
to the ice box. Despite this, some ice
may be leftover in the ice box which
may be taken from there. To restart ice
formation, ice cancel button has to be
pressed for 3 seconds.
23
EN