Dolmar ET-70 C Instructions D'emploi page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
Thank you for choosing a DOLMAr product!
We trust that you will be a satisfied customer. You have chosen
one of the latest models of DOLMAR eletric trimmer. With its
modern design, the ET-70 C, ET-00 C is the ideal helper for
lawn care, flower beds and path borders. It is intended only for
household use around the home and garden. Its powerful electric
motor, high torque, light aluminium shaft tube, soft grip, and
anti-vibration system give it good handling qualities. It naturally
also has a detensioner for the power cable.
The ET-70 C, ET-00 C electric trimmer has a two-line cutter
head with quiet trimming line.
Intended use: ET-70 C, ET-00 C electric trimmer is designed
for cutting grass with non-metallic tools, and for use by a single
person. It is not suitable for cutting brush or bushes! It must not
be used in damp weather (rain, fog etc.)!
In order to ensure your personal safety and the optimum operation
and functioning of your new electric trimmer, we have a very
important request:
read this instruction manual thoroughly before using the
trimmer for the first time, and follow all safety precautions!
Failure to observe these precautions can lead to severe
injury or death!
EU Conformity Declaration
The undersigned, Shigeharu Kominami and Rainer Bergfeld,
as authorized by DOLMAR GmbH, declare that the DOLMAR
machines,
Type: ET-70 C, ET-100 C
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045
Hamburg, Germany, conforms to the basic safety and health
requirements of the applicable EU guidelines:
EU Machine Directive 98/37/ EG,
EU EMC Directive 89/336/ EWG (modified by 91/263/ EWG,
92/3/ EWG and 93/68/ EWG),
EU low voltage Directive 73/23 EWG (modified by 93/68/EWG,
Outdoor Noise Directive 2000/4/EG
The most important standards applied to properly meet the
requirements of the above EU Directive were: EN 786, EN
60335-2-9, CISPR 2, EN 50082-, DIN VDE 0879 T.
The conformity assessment procedure 2000/4/EG was
performed per Annex VI. ET-70 C: The measured noise level
(Lwa) is 95 dB(A). The guaranteed noise level (Ld) is 96 dB(A).
ET-00 C: The measured noise level (Lwa) is 94,5 dB(A). The
guaranteed noise level (Ld) is 96 dB(A).
ET-70 C: Testing per 2000/4/EG was performed by: NOVICON
s.a.s. di F Monti & c. - 23804 Monte Marenzo (LC) - ITALY.
ET-00 C: Testing per 2000/4/EG was performed by: TÜV
Süd Industrie Service GmbH.
Hamburg, 2 January 2007
For DOLMAR GmbH
Shigeharu Kominami
Managing Director
4
Rainer Bergfeld
Managing Director
Table of contents
EC declaration of conformity .......................................... 4
Packing .............................................................................. 4
Delivery inventory ............................................................ 5
Explanation of symbols ................................................... 5
General precautions ..................................................... 6
Personal protective equipment ..................................... 6
Putting into operation ...............................................6-7
Working behavior / Method of working .......................... 7
Applications for cutting tools .......................................... 7
Transport and Storage .................................................. 8
Maintenance ................................................................. 8
First Aid ......................................................................... 8
Technical data ................................................................... 9
Components ...................................................................... 9
Handle installation ....................................................... 20
Installing the trimmer guard .......................................... 20
Installing the line knife ................................................... 20
Installing the trimmer head ........................................... 2
Power cable detensioner ............................................... 2
Turning the motor on/off ................................................ 2
Maintenance instructions .............................................. 22
Lengthening the line ...................................................... 22
Replacing the line .......................................................... 23
Service and maintenance ............................................. 23
Trouble shooting .............................................................. 23
Service, spare parts and guarantee ................................ 24
Extract from the spare part list ....................................... 25
notes ................................................................................ 25
Packing
Your new DOLMAR electric trimmer comes in a cardboard box
to protect it from damage during shipping.
Cardboard is a raw material. We encourage you to re-use the
box or recycle it (waste paper).
Do not dispose of electric equipment together with household
waste material!
Page

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Et-100 c

Table des Matières