Accessory Disc Selection And Use; Slicing Operation - Waring Commercial WFP16S Mode D'emploi

ACCESSORY DISC SELECTION AND USE

The food processor disc accessories are made to perform a wide
variety of food processing tasks: slicing, whipping, shredding and
grating. Three (3) accessory discs are included with the WFP16S.
As of this printing they are:
WFP16S10 - Adjustable Slicing Disc
WFP16S11 - Sealed Whipping Disc
WFP16S12 - Reversible Shredding Disc

SLICING OPERATION

• The WFP16S comes with an adjustable slicing disc. The
adjustable slicing disc allows you to slice foods anywhere
from 1 to 6mm thick using 16 different slicing positions!
Prior to mounting the disc onto the motor shaft (see page
9 for assembly instructions), use the knob to select desired
thickness. Once you have selected the thickness and mounted
the disc onto the unit, you may secure the sealed bowl cover
onto the batch bowl and remove the pusher.
• Prepare all food items to be processed by washing and peeling
as required. Remove pits, stones, and large seeds. Be sure the
food will fit into the proper feed chute. Foods such as carrots,
cucumbers, etc., should be cut flat at both ends to provide a
consistent slice throughout the whole product.
• With foods like cabbage, lettuce or any product that has an
undesirable core, the core should be removed. Medium size
cabbage or lettuce heads may be cut into thirds to fit in the
feed chute. Larger heads may need to be quartered.
• When food preparation is complete, fill the chosen feed chute,
put the pusher in place, turn the machine on and monitor the
results.
• Never try to slice soft cheese. Use only hard cheese.
Mozzarella may be sliced only when well chilled.
• When sliced food nears the 14 cups line on the bowl,
empty bowl.
15