Legal Notice; Maintenance Instructions; Moving And Storage Instructions - Wallbox Pulsar Plus Guide D'installation

Masquer les pouces Voir aussi pour Pulsar Plus:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Warning for Wallbox hardwired products: Grounding instructions
This product must be connected to a grounded, metal, permanent wiring system,
or an equipment-grounding conductor must be run with the circuit conductors and
connected to the equipment grounding terminal on the product.
See installation instructions.
WARNING: Consult a qualified electrician to ensure that the installation meets local regulations.

Legal notice

Any information in this manual may be changed without prior notice and does not
represent any obligation on the part of the manufacturer.
Any resulting damage due to disregard or actions contrary to the instructions in this
manual is excluded from the product warranty.
Images in this manual are for illustration purposes only and might differ from the
delivered product.

Maintenance instructions

• Your Wallbox charger contains no user serviceable parts. Do not attempt
to repair or service any other part of the unit yourself. If the unit requires
servicing, please contact Wallbox customer service.
• The installation, maintenance, and servicing of your Wallbox charger must
only be performed by qualified personnel in accordance with applicable local
regulations.
• Protect your Wallbox charger from any external impact.
• Take appropriate precautions with electronic medical implants.
• Disconnect the main service power to your charger before cleaning the unit.
Do not use cleaning solvents to clean any part of your charger. Use a clean,
dry cloth to remove accumulated dust and dirt.
• Under no circumstance should you over-tighten the connecting cable while it
is connected to the vehicle.
• Ensure that the charging cable is positioned in such a way so that it will not be
stepped on, tripped over, or subjected to damage or stress. Do not close your
garage door on the charging cord.

Moving and storage instructions

• Your Wallbox charger should never be lifted or carried by the power supply
cord or by the EV cable. Always lift or carry your charger by lifting up the
charger's enclosure.
• The charger is only to be used for fixed installations and cannot be used as a
portable device.
• Store your Wallbox charger in a dry location, and within the storage
temperature of -40ºF to 158ºF (-40ºC to 70ºC).
EN
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pup1

Table des Matières