Section 6. Care Of Your Machine; Dismantling And Assembling Hook Race Unit; To Dismantle Hook Race Unit; To Assemble Hook Race Unit - Janome 2041 Manuel D'instructions

SECTION 6. CARE OF YOUR MACHINE

Dismantling and Assembling
Hook Race Unit
Note:
Turn off the power switch and/or unplug the machine.

To dismantle hook race unit:

Raise the needle to its highest position and open the hook cover.
Open the hinged latch of bobbin case and take it out of the
machine.
Open the hook race ring holders and remove the hook race ring.
Remove the hook.
* Clean the hook race with a brush and a soft dry cloth.
q Bobbin case
w Hook race ring holders
e Hook race ring
r Hook
t Hook race

To assemble hook race unit:

Hold the hook by the center pin and fit it carefully back into the
hook race, forming a perfect circle with the shuttle driver.
Attach the hook race ring making sure the bottom pin fits into the
notch.
Lock the hook race ring by turning the holders back into position.
Insert the bobbin case.
y Pin
u Notch

Cleaning the Feed Dog

Note:
Turn off the power switch and/or unplug the machine
before cleaning the feed dog.
Remove the needle and the presser foot.
Remove the needle plate set screw and remove the needle plate.
With a brush, clean out dust and lint clogging the feed dog teeth.
Reset the needle plate.
7
66
2
1
5
4
3
6