General Safety Instructions And Warnings - Mettler Toledo M80 SM Instructions D'utilisation

en
22
3.2. General safety instructions and warnings
h
the following instructions.
The following is a list of general safety instruc-
tions and warnings. Failure to adhere to these in-
structions can result in damage to the equipment
and/or personal injury to the operator.
– The M80 SM transmitter should be installed
and operated only by personnel familiar with
the transmitter and who are qualified for such
work.
– The M80 SM transmitter must only be operated
under the specified operating conditions.
– Repair of the M80 SM transmitter must be per-
formed by authorized, trained personnel only.
– With the exception of cleaning procedures, as
described in this manual, the M80 SM trans-
mitter must not be tampered with or altered in
any manner.
– METTLER TOLEDO accepts no responsibility
for damage caused by unauthorized modifi-
cations to the transmitter.
– Follow all warnings, cautions, and instructions
indicated on and supplied with this product.
– Install equipment as specified in this instruction
manual. Follow appropriate local and national
codes.
– If this equipment is used in a manner not spec-
ified by the manufacturer, the protection pro-
vided by it against hazards may be impaired.
M80 SM
30 530 859 A
Be sure to read and observe
NOTE:
M80 SM Sensor Mount Transmitter
© 08 / 19 Mettler-Toledo GmbH
Printed in Switzerland