Table Des Matières; Introduction; Safety Instructions - Mettler Toledo easyFlow Instructions D'utilisation

easyFlow
easyFlow
Instruction manual
Contents
1. Introduction . . . . . . . . . . . . . .3
1.1 Safety instructions . . . . . . . . . . . .3
2. Product Description . . . . . . . .4
2.1. Installation . . . . . . . . . . . . . . . . .4
2.2 Checking for correct installation . . .6
3. Maintenance . . . . . . . . . . . . .6
4. Product Specification . . . . . . .6
4.1 Supply . . . . . . . . . . . . . . . . . . . .6
4.2 Technical specification . . . . . . . . .6
5. Warranty . . . . . . . . . . . . . . . .6
© 12 / 14 Mettler-Toledo AG, Printed in Switzerland

1. Introduction

These operating instructions describe how
to use the easyFlow housings.
These housings are state of the art, high-
grade engineered products, tested by
METTLER TOLEDO.
Nevertheless, improper handling could be
dangerous.
Page
Immediately on receipt, check that the hous-
ing is complete and in good condition.
Notify your supplier of any damage or defi-
ciency. Please also refer to your supplier for
further information on the ordering of spare
parts and accessories.

1.1 Safety instructions

Safety and hazard warnings could, if ig-
nored, result in injuries to personnel and/or
material damage.
Important! Work on the housing should
be assigned only to trained personnel.
- Observe local regulations concerning the
safety of people and property.
- Be sure to read and follow the instruc-
tions.
- The easyFlow housings are designed to
contain only METTLER TOLEDO sensors.
Any other kind of use could be danger-
ous and is not permitted.
52 403 972
3
easyFlow