Ameriphone CLS-45i Manuel D'utilisation page 9

Features – Handset
The following controls and indicators are on
the face of the handset.
Keypad. The keypad on the handset is

backlit while in use.
TALK button. Press to turn the hand-

set ON and OFF. It can be used to answer,
place or end a call.
CALLER ID button. Press to dial the

Caller ID position selected by the up/down
button.
LCD Display. Displays Caller ID and

telephone status information. It stores up
to 50 telephone numbers and has three
language selections.
Earpiece.

Antenna.

IN USE / NEW CALL indicator.

Lights up when the telephone is in use. It
also flashes when there are new calls that
have not been reviewed.
DELETE / BACK button. This button

is used:
a. to delete Caller ID entries
b. to backspace and delete characters
when entering a new name and number
into memory
FLASH / EXIT button. Press to:

a. access telephone company subscription
services, such as Call Waiting (if available)
b. exit any menu and return to the Standby
screen
REDIAL / FWD button. This button is

used:
a. To redial last number dialed: Press
to redial the last number that you dialed
up to a maximum of 32 digits. It must
be the first button pressed the next
time you activate the handset, either by
picking it up from the cradle or, if out of
the cradle, by pressing TALK.
b. To insert pauses into numbers:
When storing numbers into memory,
press REDIAL to insert pauses when
necessary, such as when entering a
sequence of numbers (calling card or
credit card number).You may also be
asked to provide information for identifi-
cation or validation purposes when mak-
ing telephone transactions, such as with
a bank or other merchant. In these cases
you would be prompted at each succes-
sive step to provide data such as the last
4-digits of your social security number,
date of birth, phone number, zip code, etc.
A pause is also used when programming
a number that is followed by an exten-
sion or a menu selection.
c. To advance the cursor to the next
character location: In storing names
into memory, (such as "BEN"), once you
have selected "B" on the "2" key, press
REDIAL to move the cursor to the right
where you will enter the "e" on the
"3" key. Continue pressing REDIAL to
advance the cursor until all the letters
of the name have been selected. Press
PROG to store the number.
UP / DOWN arrows. Press to scroll

through the Caller ID and SETUP dis-
play.
INTERCOM / ENTER button. Press

to:
a. activate the Intercom function
b. store or confirm any selection during
SETUP or when entering names/num-
bers into memory
MEM button. The MEM button is used

when storing and accessing frequently
dialed and emergency telephone numbers
5