Ameriphone CLS-45i Manuel D'utilisation page 22

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installing and Using Your CLS45i
Handset Tone Control
To adjust the frequency of the incoming
sounds to the level that gives you the greatest
clarity, simply slide the TONE Control switch
to LO or HI.
Intercom
The CLS45i can be used like an intercom if
you want to speak to or page someone in
another room. It can also be used for a three-
way call between the handset, base and a third
party on another telephone line.
Paging and Talking to the
Handset from the Base
Press INTERCOM on the base and the
handset beeps for 15 seconds. If you press and
hold INTERCOM, it beeps for 60 seconds.
To stop the beep:
• from the base, press INTERCOM once
• from the handset, press INTERCOM once
if you want to talk to the base.
Press INTERCOM twice if you want to end
Paging.
Talking to the Base from the
Handset
1. Press INTERCOM on the handset.The base
is paged, beeps twice and goes directly into
Intercom mode, talking with the handset
immediately.
2. To exit Intercom mode, press INTERCOM
on either the handset or the base.
18

Publicité

Chapitres

Table des Matières
loading

Table des Matières