Ameriphone CLS-45i Manuel D'utilisation page 14

Features – Base
Controls on the right side.
AMPLIFIER OFF ON. This switch deter-
mines the initial state of the amplification on
the handset. It always returns the handset to
whichever position the switch is set.When Off,
the handset starts calls in non-amplified mode.
When On, the handset starts calls in amplified
mode.The Amplify button on the handset toggles
between the amplification levels, regardless of the
position of the switch. CAUTION: when
this switch is set to ON the vol-
ume will be louder than normal
when the handset is turned on.
To protect persons with normal
hearing we suggest setting the
switch to OFF. This will keep the
volume at a normal level until the
AMPLIFY button is pressed.
T P (Tone/Pulse). Slide the switch to the
type of telephone service you have; "T"
(touch tone) or "P" (pulse) for rotary dialing.
Base, right and back sides
T P (Tone/Pulse) switch
RINGER VOLUME switch
AMPLIFIER ON OFF switch
RING TONE switch
EXT SPK OUT (Audio) jack
TELEPHONE LINE
jack
AC ADAPTER
jack
RING TONE. Slide to set ringer tone to "L"
(low) or "H" (high).
RINGER. Slide to set ringer loudness to
"OFF", "L" (low), "M" (medium) or "H"
(high).
EXT SPK OUT (Audio) jack. This
3.5 mm jack is compatible with Personal
Computer speakers and assistive listening
devices such as a neckloop and cochlear
implant. See page 7 (handset).
Back side of the base.
AC ADAPTER jack. This jack is for the
AC adapter that provides electric power
to your phone. See page 31 "Product
Specifications."
TELEPHONE LINE jack. Next to the
DC adapter, this jack allows connection to
the telephone line.
10