When FRAME BY FRAME is selected
: Displays the first frame of the movie.
: Displays the last frame of the movie.
: Displays the next frame. The movie can be played continuously by
holding the button down.
: Displays the previous frame. The movie can be played continuously in
reverse by holding the button down.
: Displays the MOVIE PLAYBACK menu.
PROTECTING PICTURES
You are recommended to protect important pictures to avoid accidentally
erasing them.
1
Set the mode dial to
• The monitor turns on.
2
Use the arrow pad or jog dial to display the picture you
want to protect.
3
Press
.
• To cancel protection, press
• Protected pictures cannot be erased by the single-frame/all-frame
erase function, but they are all erased by formatting.
Note
ERASING PICTURES
This function enables you to erase recorded pictures. This can be done either
one frame at a time or to all the pictures on the card at once.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
Note
keep.
Single-frame erase
1
Set the mode dial to
• The monitor turns on.
2
Use the arrow pad or jog dial to display the picture you
want to erase.
and turn the camera on.
again.
and turn the camera on.
En
En 41