mspa Alpine Manuel Du Propriétaire page 14

IMPORTANT:
● Inspect the spa air pressure regularly for leak, premature wear or deterioration.
● Check and wax the zipper regularly, to make it smooth for operation and avoid splits.
4.4
4.5 Turn on the Heater on the controller, refer to the "Controller operation" section.
Maximum heating temperature is 42°C (108°F). Hourly heating rate is about 2°C - 2.5°C (3.5°F -
4.5°F) for 2 and 2+2 person model, 1.5°C - 2°C (2.5°F - 3.5°F) for 4 person round model and 1.2°C -
1.8°C (2°F - 3°F) for 6 person model.
5.
Zipper and Buckle Operation
5.1 Digital Lock Operation
Original password is "000". Following the steps below to change the password:
● Push the button (a) in the direction of Fig.7.1.(1) to unlock the digital lock.
● Set your preferred password in 3 digits by turning the number wheel (b), see Fig.7.1.(2).
● Insert back the cable (c). The new password is set.
5.1.(1)
(a)
5.2 Square Spa Buckle Lock Operation
Lock the Buckle
● Insert the buckle on the Ground Mat into the Spa cover buckle, until you hear a "Click" sound.
Unlock the Buckle
● Pinch both sides of the locked buckle, and press down the round dot in center in the same time.
Press down the center button and release the lock.
5.2
5.1.(2)
®
Lock
5.1.(3)
®
(b)
14
(c)
®
Unlock