Function Keys - Leister UNIROOF AT Mode D'emploi

8. Control panel of the UNIROOF AT
The control panel (2) is comprised of the function keys with which you control the various menu functions and the
display where the respectively selected setting, menu options or the values valid for the running time are displayed.

8.1 Function keys

30
31
32
Multiple allocation of function keys Control panel (2) / Symbols Display
Symbol
Designation
Arrow keys
Up/Down (30)
Heating button
On/O (31)
Press the Minus/Plus arrow keys (32)
briefl y
Press
and hold
Button
Confi rm (33)
In the work display (41)
Switching between the symbols
(changing the sequence).
Sets the required setpoint in 0.1m/
min, 5°C or 5% steps
Sets the required setpoint in 10°C
or 10% steps
The set value is applied and shown
in the Menu selection (42).
30. Up/Down arrow keys
31. Button for heating "On/O "
32. Minus/Plus arrow keys
33. Confi rm button
33
In the menu selection (42)
Switching between menu
selection and work display.
As symbol, it shows the
changeover to the cool-
down process and from the
start display into welding
mode.
Changing the position/
Switching the menu
Changing the position/
Switching the menu
The desired function or the
menu is executed.
57