Abus TVAC19100C Notice D'utilisation page 21


Motion detection
The settings for motion detection are required for e-mail
notification or push notification as well as for motion-controlled
recording.
Detect mode
Here you can select which mode should be used for the
notifications.
You can choose between Off, PIR or Software.
Off:
No notifications are sent or recordings made if motion is
detected.
PIR:
The motion detection occurs via the PIR sensor.
Software:
The motion detection occurs via the camera software.
Motion detection
You can make the settings for the motion sensitivity here.
You can choose between "Low" and "High".
Off:
No notifications are sent or recordings made if motion is
detected.
Low:
Motion detection with low sensitivity.
High:
Motion detection with high sensitivity.
The setting for sensitivity is only used in the Software mode.
21
English