Setting Up The Vcr Plus+ Programming System - Philips DVD750VR Mode D'emploi

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 40

Setting Up the VCR Plus+ Programming System

40
1
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the
VCR Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers,
and since channel numbers differ from area to area, you must program the VCR with your local
channel information.To fill in the boxes, you will need 1) a cable channel list, if applicable (you can
request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers (Guide
channels), which you can find in your TV guide or the TV listings of your local newspaper.
NOTE: If you are using a Cable Box/DBS, the User channel must be 3 or 4 (the Cable
Box/DBS output channel) for every Guide channel.
Station
Call Letters
Channels
GUIDE CH. USER CH.
Channels
Station
GUIDE CH.
Call Letters
USER CH.