Philips DVD750VR Mode D'emploi page 8

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 8
8 Hookups (cont'd)
Simplest connection using only the supplied black RF coaxial cable
This connection will let you use the features of both the VCR and the DVD Player.
ANT-IN
ANT-OUT
1
Antenna or
Cable TV
signal
1
Disconnect the antenna or Cable TV signal from your TV and con-
nect it to the ANT -IN (Antenna In) jack of your DVD/VCR.
2
Connect the supplied black RF coaxial cable to the ANT -OUT
(Antenna Out) jack on the back of the DVD/VCR and to the
ANTENNA IN JACK on the TV. The ANTENNA IN jack on the TV may be
labelled TV IN, RF IN, 75Ω (ohm), or ANT-IN. See your TV owner's manual for
assistance.
3
Plug in the power cords of the TV and the DVD/VCR.
4
Set your TV to channel 3 or 4. The DVD/VCR's output channel is 3 when
you purchase it. So, set your TV to channel 3 when the DVD/VCR is new.
If you cannot use channel 3 at your TV, you can change the DVD/VCR's output
channel to channel 4.To do so, press the VCR button to put the DVD/VCR in
VCR mode.The green VCR light will be on the front of the DVD/VCR. Insert a
videotape and press PLAY B to start playback.
and hold the (VCR) PLAY B button on the front of the DVD/VCR
for three to five seconds. Each time you do this, the DVD/VCR's output
channel switches between 3 and 4. Change your TV to channel 3 or 4 accord-
ingly. (You cannot change the DVD/VCR's output channel while adjusting track-
ing manually. Press STOP C to stop play and cancel manual tracking, then press
PLAY B to resume play and change the output channel.)
There is not a channel 3/4 switch on the DVD/VCR (as customary with most
VCRs).
5
You are ready to turn on the DVD/VCR. Go to page 17 before turn-
ing on the DVD/VCR.
DVD/VCR to TV only
DVD/VCR VCR DVD
AUDIO OUT AUDIO IN S-VIDEO COMPONENT AUDIO DIGITAL
OUT VIDEO OUT OUT
AUDIO OUT
L L Y
R R C B L
VIDEO OUT VIDEO IN COAXIAL
C R R
OFF ON
DVD/VCR VCR
PROGRESSIVE
AUDIO OUT AUDIO IN
ANT-IN
L
R
VIDEO OUT VIDEO IN
ANT-OUT
L
7 5
A N T
R
/
C A B
L E
2 Black RF
coaxial cable
(supplied)
During playback, press
75Ω
ANT /
CABLE
Antenna In Jack
(on back of TV)
example only