Vcr Status Displays 31 - Philips DVD750VR Mode D'emploi

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 31
You may access status displays by pressing DISPLAY.The displays
may include the current time, channel, and other information.
1
Press DISPLAY. The COUNT display will appear for five
seconds. After five seconds, only the real-time tape counter
will appear.This counter shows you the elapsed playing
time of the tape (from the point at which the counter was
set to zero).The counter also will appear on the display
panel on the front of the DVD/VCR.
STOP
SLP
2
Press DISPLAY again. The CLOCK display will appear
for five seconds. After five seconds, only the time will
appear (the clock must be set). (If you are watching TV, the
channel number and the availability of stereo or second
audio will also appear.) The time also will appear on the
display panel on the front of the DVD/VCR.
STOP
SLP
3
Press DISPLAY again to remove all the displays.
0:12:34 HIFI
5:40 PM
CH 02
STEREO
SAP

VCR Status Displays 31

1-3
SEARCH MODE
REPEAT REPEAT
SUBTITLE ZOOM
RETURN
DVD
SYSTEM
MENU
STOP
TIMER SET
SPEED
4
8
Helpful Hints
• If the channel you select has no
broadcast, the screen will be solid
blue.
• You cannot access a status dis-
play when viewing a still picture,
during slow motion, or during for-
ward and reverse searching.
• Channel numbers appear on the
screen for a few seconds each
time you change channels.
STANDBY-ON
DISPLAY
AUDIO
A-B
ANGLE SKIP / CH
TITLE CLEAR/RESET SLOW
VCR/TV
VCR
DISC/VCR
MENU
OK
PLAY PAUSE
VCR Plus+ RECORD
1 2 3
5 6 7
9 0 +10